-
All Categories
- Brushless DC motor
- CNC sets with stepper motors
- Brushless DC motor driver
- Stepper motor driver
- Belt, pulley
- Cable, connector, cable sleeve
- Stepper motor
- Stepper motor controller, CNC
- Laser
- Power supply
- Stepper motor mount
- Gearbox
- Coupler
- Switch, sensor, joystick
Notification: between 31.7. and 4.8. we are on collective vacation. All orders received during this time will be shipped on August 7. Thank you for your understanding.
Featured Products
-
- Material: Aluminum alloy
- Sleeve material: Polyurethane
- Outer diameter/length: D30 L40
- Inner diameter: 10/10mm, 10/12mm, 10/14mm, 10/15mm, 10/16mm, 12/12mm, 12/14mm, 12/15mm, 12/16mm, 14/14mm, 14/15mm, 14/16mm, 15/15mm, 15/16mm, 16/16mm, 8/10mm, 8/12mm, 8/8mm, 8/14mm, 8/15mm, 8/16mm
-
- Brand: ACT Motor
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 2.55 V
- Phase inductance: 2.8 mH
- Phase resistance: 1.5 Ω
- Holding torque: 40 Ncm
- Shaft diameter: 5 mm
- Motor length: 62 mm
-
- Brand: ACT Motor
- Power supply: 12-32 VDC
- Maximum current: 3.0 A
- Microstep resolution: 200-12800 pulses/rev
- Input pulse frequency: 0~160kHz
- Working temperature: -5~50°C
-
- Brand: ACT Motor
- Rated current/phase: 5.6 A
- Rated voltage: 3.36V
- Phase inductance: 7.5 mH
- Phase resistance: 0.6 Ω
- Holding torque: 10 Nm
- Shaft diameter: 14 mm
- Motor length: 114 mm
-
- Length: 200 cm
- Connector: 3pin XH2.54
-
- Length: 100 cm
- Connector: 3pin XH2.54
-
- Power supply: 12~36 VDC
- Dimension: 65 x 52 mm
- Number of axles: 4
-
- Brand: Cloudray
- Power supply: 18-50 VDC
- Maximum current: 5.6 A
- Microstep resolution: 200-25600 pulses/rev
- Input pulse frequency: 0~200kHz
- Working temperature: 0℃~50℃
-
- Brand: ACT Motor
- Rated current/phase: 3.0 A
- Rated voltage: 3.0V
- Phase inductance: 3.5 mH
- Phase resistance: 1.0 Ω
- Holding torque: 1.9 Nm
- Shaft diameter: 6.35 mm
- Motor length: 76 mm
-
- Brand: ACT Motor
- Power: 201 W
- Input voltage: 200-240 VAC or 100-130 VAC
- Output voltage: 24 VDC
- Output current: 8.3 A
-
- Dimension: 81 * 77 * 31 mm
- Number of axles: 4
- Input pulse frequency: 0~100kHz
-
- Brand: ACT Motor
- Power supply: +5 VDC
- Dimension: 90 * 70 * 20mm
- Number of axles: 6
-
- Brand: ACT Motor
- Power supply: 20-50 VDC
- Maximum current: 4.2 A
- Microstep resolution: 400-25600 pulse/rev
- Input pulse frequency: 0~200kHz
- Working temperature: -10℃~45℃
Latest contributions
Stepper Motor FAQ, Part 1
Author: Tadej Grobelšek
Published: September 21, 2021
Category: General about stepper motors
Stepper Motor FAQ, Part 2
Author: Tadej Grobelšek
Published: September 30, 2021
Category: General about stepper motors
This post shows how easily and effectively, with very few additional components, we can control a stepper motor with Leadshine's DM805-AI Stepper Motor Driver. The control system shown was used to move the Z axis of the machine with a Nema 23 stepper motor based on manual manipulation of the slow and fast motion switches. The switches are three-position with return spring [...]
Nowadays, mechanical components and electronics for CNC machines have become widely available, so realizing the idea of building your own CNC machine is just a step away. When planning, sooner or later we face the question of how we will control our CNC machine. For control, we need to choose both the appropriate software and the controller that comes with it [...]
We receive a lot of questions from our customers on the topic of stepper motors, from completely general ones to more complex ones that require a deeper dive and teach us something new. Working with stepper motors, like any new field that we tackle and eventually try to master, starts with basic questions (what, how, [...]
-
- Brand: ACT Motor
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 2.55 V
- Phase inductance: 2.8 mH
- Phase resistance: 1.5 Ω
- Holding torque: 40 Ncm
- Shaft diameter: 5 mm
- Motor length: 62 mm
-
- Brand: ACT Motor
- Rated current/phase: 5.6 A
- Rated voltage: 3.36V
- Phase inductance: 7.5 mH
- Phase resistance: 0.6 Ω
- Holding torque: 10 Nm
- Shaft diameter: 14 mm
- Motor length: 114 mm
-
- Brand: Cloudray
- Step angle: 1.8 °
- Rated current/phase: 1.8 A
- Rated voltage: 4.32 V
- Phase inductance: 5.8 mH
- Phase resistance: 2.4 Ω
- Holding torque: 0.52 Nm (before reduction)
- Shaft diameter: 8 mm
- Motor length: 109.5 mm (with reducer)
-
- Brand: ACT Motor
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 2.55 V
- Phase inductance: 2.8 mH
- Phase resistance: 1.5 Ω
- Holding torque: 40 Ncm
- Shaft diameter: 5 mm
- Motor length: 40 mm
-
- Brand: Sanyo Denki
- Step angle: 1.8 °
- Rated current/phase: 6.0 A
- Rated voltage: 2.16 V
- Phase inductance: 2.8 mH
- Phase resistance: 0.36 Ω
- Holding torque: 7.0 Nm
- Shaft diameter: 14 mm
- Motor length: 96.5 mm
-
- Brand: Cloudray
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 4.42 V
- Phase inductance: 5.1 mH
- Phase resistance: 2.6 Ω
- Holding torque: 42 Ncm
- Shaft diameter: 5 mm
- Motor length: 40 mm
-
- Brand: Cloudray
- Step angle: 1.8 °
- Rated current/phase: 1.8 A
- Rated voltage: 3.49 V
- Phase inductance: 4.96 mH
- Phase resistance: 1.94 Ω
- Holding torque: 71 Ncm
- Shaft diameter: 5 mm
- Motor length: 60 mm
-
- Brand: Leadshine
- Rated current/phase: 5.0 A
- Rated voltage: 1.9V
- Phase inductance: 1.75 mH
- Phase resistance: 0.38 Ω
- Holding torque: 2.3 Nm
- Shaft diameter: 8 mm
- Motor length: 76 mm
-
- Brand: ACT Motor
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 2.55 V
- Phase inductance: 2.8 mH
- Phase resistance: 1.5 Ω
- Holding torque: 40 Ncm
- Shaft diameter: Tr8*8 (P2), shaft length = 300 ± 2 mm
- Motor length: 40 mm
-
- Brand: Cloudray
- Step angle: 1.8 °
- Rated current/phase: 5.0 A
- Rated voltage: 2.5 V
- Phase inductance: 2.2 mH
- Phase resistance: 0.5 Ω
- Holding torque: 3.0 Nm
- Shaft diameter: 8.00 ± 0.012 mm
- Motor length: 86 mm
-
- Brand: ACT Motor
- Power supply: 12-32 VDC
- Maximum current: 3.0 A
- Microstep resolution: 200-12800 pulses/rev
- Input pulse frequency: 0~160kHz
- Working temperature: -5~50°C
-
- Brand: Leadshine
- Power supply: 20 ~ 50 VDC (recommended), max 74 VDC
- Maximum current: 8.0 A
- Microstep resolution: 200 ~ 51200
- Input pulse frequency: 0~500kHz
- Working temperature: 0 ~ 50°C
-
- Brand: Leadshine
- Power supply: 20~80VDC
- Maximum current: 5.0 A (RMS)
- Microstep resolution: up to 12800 pulses/rev
- Input pulse frequency: 0~200kHz
- Working temperature: < 70 °C
-
- Brand: BIG TREE TECH
- Power supply: 12V/24V DC
- Maximum current: 2.0 A (Peak)
- Microstep resolution: max 256
-
- Brand: Makerbase
- Power supply: 8 ~ 40 VDC
- Maximum current: 4.33 A
- Microstep resolution: max 1/64
-
- Brand: BIG TREE TECH
- Power supply: 8~60 VDC
- Maximum current: RMS current 10.6 A (without active cooling max 3.0 A)
- Microstep resolution: max 256
-
- Brand: ACT Motor
- Power supply: 110~220VAC
- Maximum current: 7.0 A
- Microstep resolution: 200~40000 pulses/rev
- Input pulse frequency: 0~150kHz
- Working temperature: 0°C ~ 70°C
-
- Brand: Leadshine
- Power supply: 20-50 VDC
- Maximum current: 5.6 A
- Microstep resolution: 400-25600 pulse/rev
- Input pulse frequency: 0~200kHz
- Working temperature: < 70 °C
-
- Brand: Leadshine
- Power supply: 24-110VDC/24-80VAC
- Maximum current: 7.2 A
- Microstep resolution: 400-51200 pulse/rev
- Input pulse frequency: 0~300kHz
-
- Brand: BIG TREE TECH
- Power supply: 4.75 ~ 28 VDC
- Maximum current: 2.8 A (peak)
- Microstep resolution: max 256
-
- Number of axles: 4
- Stepper motor: 4 x Nema 23 step motor with closed loop 2.8Nm
- Driver: 4 x HBS57 Stepper Motor Driver 4.5A 24-60VDC
- Power supply: 2 x Switching power supply 36 V 350 W 9.8 A
-
- Number of axles: 3
- Stepper motor: 3 x Nema 23 bipolar stepper motor 1.9Nm 3.0A
- Driver: 3 x DM542 Stepper Motor Driver 4.2A 20-50VDC
- Power supply: 1 x Switching power supply 36 V 350 W 9.8 A
-
- Number of axles: 3
- Stepper motor: 3 x Nema 34 bipolar stepper motor 8.4Nm 5.6A
- Driver: 3 x DM860H Stepper Motor Driver 7.2A 24-110VDC/24-80VAC
- Power supply: 3 x Switching power supply 60 V 350 W 5.8 A
-
- Number of axles: 4
- Stepper motor: 4 x Nema 34 bipolar stepper motor 8.4Nm 5.6A
- Driver: 4 x DM860H Stepper Motor Driver 7.2A 24-110VDC/24-80VAC
- Power supply: 4 x Switching power supply 60 V 350 W 5.8 A
-
- Number of axles: 3
- Stepper motor: 3 x Nema 23 bipolar stepper motor 2.5Nm 3.0A
- Driver: 3 x DM542A Stepper Motor Driver 4.2A 20-50VDC
- Power supply: 2 x Switching power supply 36 V 350 W 9.8 A
-
- Number of axles: 4
- Stepper motor: 4 x Nema 23 bipolar stepper motor 2.8Nm 4.2A
- Driver: 4 x DM542S Stepper Motor Driver 5.0A 20-50VDC
- Power supply: 2 x Switching power supply 36 V 350 W 9.8 A
-
- Brand: Leadshine
- Power supply: 20~80VDC
- Maximum current: 5.0 A (RMS)
- Microstep resolution: up to 12800 pulses/rev
- Input pulse frequency: 0~200kHz
- Working temperature: < 70 °C
-
- Brand: WiXHC
- Power supply: 24 VDC
- Dimension: 184x127x30 mm
- Number of axles: 3, 4
-
- Brand: Makerbase
- Power supply: 12~24 VDC
- Dimension: 90*70 mm
- Number of axles: 3
-
- Brand: Raspberry Pi
- Chip: RP2040, Cortex-M0+
- Digital I/O: 30
- Analog I/O: 4
- Clock frequency: 133 MHz
- Micro-USB cable: Yes, No
-
- Brand: Warp9 Tech Design Inc.
- Power supply: +5 VDC
- Dimension: 92mm x 70mm
- Number of axles: 6
-
- Brand: Controllino
- Chip: ATMEGA328
- Clock frequency: 16 MHz
-
- Brand: Makerbase
- Power supply: 12~24 VDC
- Dimension: 90*70 mm
- Number of axles: 3
-
- Brand: Aideepen
- Input voltage: 5~12 VDC
-
- Brand: Aideepen
- Input voltage: 5~30 VDC
-
- Power supply: 12~36 VDC
- Dimension: 65 x 52 mm
- Number of axles: 4
-
- Brand: Meanwell
- Power: 200 W
- Input voltage: 90~132VAC / 180~264VAC
- Output voltage: 10.2~13.8VDC
- Output current: 17 A
-
- Brand: ACT Motor
- Power: 350 W
- Input voltage: 90-132VAC/180-264VAC 47~63Hz
- Output voltage: 20 ~ 26.4 VDC
- Output current: 14.6 A
-
- Brand: Meanwell
- Power: 100 W
- Input voltage: 90~264VAC, 127~370VDC
- Output voltage: 24 VDC
- Output current: 4.2 A
-
- Brand: Meanwell
- Power: 350 W
- Input voltage: 90~132VAC / 180~264VAC
- Output voltage: 43.2~52.8VDC
- Output current: 7.3 A
-
- Brand: Leadshine
- Power: 300 W
- Input voltage: 220VAC or 120VAC (optional)
- Output voltage: 68 VDC
- Output current: 5.0 A
-
- Brand: Meanwell
- Power: 150 W
- Input voltage: 85~132VAC/170~264VAC, 240~370VDC
- Output voltage: 21.6~28.8VDC
- Output current: 6.5 A
-
- Brand: Meanwell
- Power: 50 W
- Input voltage: 120 ~ 373 VDC, 85 ~ 264 VAC
- Output voltage: 5 VDC
- Output current: 10 A
-
- Brand: Meanwell
- Power: 200 W
- Input voltage: 90~132VAC / 180~264VAC
- Output voltage: 32.4~39.6VDC
- Output current: 5.9 A
-
- Brand: Meanwell
- Power: 100 W
- Input voltage: 85~264VAC, 120~373VDC
- Output voltage: 10.2~13.8VDC
- Output current: 8.5 A
-
- Brand: Meanwell
- Power: 350 W
- Input voltage: 90~132VAC / 180~264VAC
- Output voltage: 21.6~28.8VDC
- Output current: 14.6 A
-
- Brand: Generic
- Timing belt type: GT2
- Material: Aluminum alloy
-
- The guy: GT2
- Material: Aluminum alloy
- Number of teeth: 20
- Width: 9 mm
- Bore diameter: 5 mm, 8 mm
-
- Timing belt type: GT2
- Width: 10 mm
- Length: 1000mm, 1250mm, 1500mm, 180mm, 200mm, 240mm, 260mm, 300mm, 350mm, 400mm, 500mm, 600mm, 640mm, 752mm, 900mm
- Material: Rubber
- The distance between the teeth: 2 mm
- Shape: Closed timing belt
-
- Brand: GATES (UNITTA)
- Timing belt type: GT2
- Width: 6 mm, 9 mm
- Material: Fiberglass rubber
- The distance between the teeth: 2 mm
- Shape: Open strap
-
- Timing belt type: GT2
- Width: 10mm, 6mm
- Material: Rubber with fabric
- The distance between the teeth: 2 mm
- Shape: Open strap
-
- Timing belt type: GT2
- Width: 6 mm
- Length: 110mm, 1220mm, 160mm, 180mm, 200mm, 240mm, 280mm, 300mm, 400mm, 610mm, 690mm, 852mm, 700mm
- Material: Rubber
- The distance between the teeth: 2 mm
- Shape: Closed timing belt
-
- Timing belt type: GT2
- Material: Aluminum alloy
- Size: 40 x 9 mm
-
- Material: Aluminum alloy
- Bore diameter: 3mm, 5mm, 8mm
- With/without teeth: Without teeth, With teeth
- Number of teeth: 16, 20
- Width: 10mm, 6mm
-
- The guy: GT2
- Material: Aluminum alloy
- Number of teeth: 16, 20, 30, 32, 36, 40, 50, 60
- Width: 10mm, 6mm
- Bore diameter: 10mm, 14mm, 5mm, 6.35mm, 8mm
-
- Timing belt type: GT2
- Width: 10mm, 6mm
- Material: Fiberglass rubber
- The distance between the teeth: 2 mm
- Shape: Open strap
-
- Material: Aluminum alloy
- Sleeve material: Polyurethane
- Outer diameter/length: D30 L40
- Inner diameter: 10/10mm, 10/12mm, 10/14mm, 10/15mm, 10/16mm, 12/12mm, 12/14mm, 12/15mm, 12/16mm, 14/14mm, 14/15mm, 14/16mm, 15/15mm, 15/16mm, 16/16mm, 8/10mm, 8/12mm, 8/8mm, 8/14mm, 8/15mm, 8/16mm
-
- Material: Aluminum alloy
- Outer diameter/length: D14 L25
- Inner diameter: 4/5mm, 5/5mm, 5/6mm, 5/7mm, 5/8mm, 6.35/8mm, 6/8mm, 8/8mm
-
- Material: Aluminum alloy
- Outer diameter/length: D26 L35
- Inner diameter: 6.35/10mm, 8/10mm
-
- Material: Aluminum alloy
- Outer diameter/length: D19 L25
- Inner diameter: 5/10mm, 5/5mm, 5/6mm, 5/6.35mm, 5/7mm, 5/8mm, 6/10mm, 6/6mm, 6/8mm
-
- Material: Aluminum alloy
- Sleeve material: Polyurethane
- Outer diameter/length: D25 L30
- Inner diameter: 10/10mm, 10/12mm, 12/12mm, 5/10mm, 5/5mm, 5/6mm, 5/6.35mm, 5/8mm, 6.35/12mm, 6 ,35/6.35mm, 6.35/10mm, 6.35/8mm, 6/10mm, 6/12mm, 6/6 mm, 6/6.35mm, 6/8mm, 8/10mm, 8/12mm, 8/8mm, 5/12mm, 5/9.525mm, 6.35/9.525mm, 8/9.525mm , 9.525/10 mm, 9.525/12 mm, 9.525/9.525 mm
-
- Brand: Lapp
- Number of wires and cross-section: 2×0.5mm2, 3×1.5mm2, 4×0.5mm2, 4×0.75mm2, 4×1.0mm2, 4×1.5mm2
-
- Brand: Lapp
- Number of wires and cross-section: 2×0.5mm2, 4×1.0mm2, 4×1.5mm2
-
- Cross section: 0.34 mm2
- Isolation: PVC
-
- Length: 100 cm
- Connector: JST-PH-6 pin, DuPont-4-pin
Latest components
-
- Material: Aluminum alloy
- Sleeve material: Polyurethane
- Outer diameter/length: D30 L40
- Inner diameter: 10/10mm, 10/12mm, 10/14mm, 10/15mm, 10/16mm, 12/12mm, 12/14mm, 12/15mm, 12/16mm, 14/14mm, 14/15mm, 14/16mm, 15/15mm, 15/16mm, 16/16mm, 8/10mm, 8/12mm, 8/8mm, 8/14mm, 8/15mm, 8/16mm
-
- Brand: ACT Motor
- Step angle: 1.8 °
- Rated current/phase: 1.7 A
- Rated voltage: 2.55 V
- Phase inductance: 2.8 mH
- Phase resistance: 1.5 Ω
- Holding torque: 40 Ncm
- Shaft diameter: 5 mm
- Motor length: 62 mm