Switching power supply 24 V 200 W 8.3A, ACT Motor

Key Features:
  • Brand: ACT Motor
  • Power: 201 W
  • Input voltage: 200-240 VAC or 100-130 VAC
  • Output voltage: 24 VDC
  • Output current: 8.3 A
Sale

27,00 29,85

3 in stock
SKU 259-D-7-6
Brand
Add to wishlist Add to compare

Description

General

The 24V 200W 8.3A switching power supply is designed for high efficiency and small size. The maximum output current is 8.3 A. It includes a switching regulator for efficient conversion of electricity. Switching DC power supplies regulate the output voltage using a process called “pulse width modulation” (PWM). The PWM process generates some high-frequency noise, but it allows the production of switching power supplies with very high energy efficiency and a small form factor. A switching power supply has higher efficiency than linear regulators because the switching transistor loses little power when it acts as a switch.

Switching power supply 24 V 200 W and its characteristics:

  • ideal for Nema 17 and Nema 23 stepper motors, brushless DC motors (brushless DC motor - BLDC)
  • small volume, light weight
  • security, high reliability
  • excellent performance: the switching power supply has a 5-10 second delay circuit to protect the load from high voltage and large output current
  • protection against: short circuit, excessive current, overload, overheating
  • convenient accommodation

Specifications

Model S-201-24
DC voltage 24V
Voltage tolerance ± 1%
Nominal current 8.3A
Current range 0-8.3A
Ripple and noise (maximum) 150mVp-str
"Line Regulation" ± 0.5%
Load regulation ± 0.5%
rated power 201.2 W
rated power 83%
Voltage setting range 20-26.4V
Input voltage 90-132VAC / 180-264VAC 47 ~ 63Hz
AC current 4.5A / 115V 2.0A / 230V
Inrush current (max.) 25A / 115V 50A / 230V
Leakage current <3.5 mA / 240 VAC
Overload protection 105-145% TYPE: EXIT OFF AC Restart
Overvoltage protection 115%-135%
Temperature coefficient ±0.03%/°C (0~50°C)
“Setup”, “Rise”, “Hold Time” 200ms, 100ms, 20ms
Vibrations 10 ~ 500Hz, 2G 10 min, / 11 cycle, 60 min, each axis
“Withstand Voltage” I / PO / P: 3KV / P-FG: 1.5KV / P-FG: 0.5KV
Isolated resistance I / PO / P, I / P-FG, I / P-FG: 500VDC / 100MΩ
Operating temperature, humidity -10°C ~ +50°C, 20% ~ 90%RH
Storage temperature, humidity -20°C ~ +85°C, 10% ~ 95%RH
Dimension 215x115x50 mm (L * W * H)
Net weight 0.9 kg
Safety standards UL1950
EMC FCCpart1.5J Class A

* All parameters NOT specifically mentioned are measured at 230VAC input voltage, rated load and 25°C ambient temperature. “Ripple & noise” are measured at 20MHz bandwidth using 12 twisted pair wires terminated with parallel capacitors 0 ,1uf and 47uf.

Specifications

Brand

Power

201 W

Input voltage

200-240 VAC or 100-130 VAC

Output voltage

24 VDC

Output current

8.3 A

Brand

ACT Motor

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. * represents mandatory fields.