Cloudray Stepper Motor Driver DM542S 18-50VDC 5.0A

Description

Introduction

Cloudray is a high-tech company that is the world's leading supplier of laser equipment. Cloudray Stepper Motor Driver DM542S is a professional digital driver developed with DSP advanced motion control algorithm. The driver enables silent operation of the stepper motor with little vibration and optimal torque, thus preventing overheating of the stepper motor. The function of automatic identification and configuration of parameters enables quick adjustment to the optimal operating modes of various motors. Unlike other DM542 stepper motor drivers, it allows a higher current of up to 5.0 A. It is suitable for stepper motors of dimensions Nema 17, Nema 23 and Nema 34 with less than 5.0 A phase current. The drive voltage is from 18VDC to 50VDC.

We can directly connect the 3.3 ~ 24V signal, which means that we do not need resistors on the signal wires. This allows for a very convenient connection to the PLC.

Key Features:

• Auto-identification and auto-configuration of parameters for optimal operation of the stepper motor.
• 16 micro step resolution: 400 ~ 25600
• Input voltage 18-50 VDC
• Output current (peak) 1.0~5.0A
• Automatic reduction of idle current
• Signal: 3.3 ~ 24V
• Signal current: 7 ~ 16 mA
• Suitable for 2-phase and 4-phase motor
• Input pulse frequency up to 200 KHz
• Protection against overvoltage and overcurrent

Data sheet

DM542S Datasheet

Connection diagram of DM542S driver and stepper motor

This is an example of a common anode connection ("EN" is not connected)).