Leadshine Stepper Motor Driver DM556 20-50VDC 5.6A

Key Features:
  • Brand: Leadshine
  • Power supply: 20-50 VDC
  • Maximum current: 5.6 A
  • Microstep resolution: 400-25600 pulse/rev
  • Input pulse frequency: 0~200kHz
  • Working temperature: < 70 °C

69,80

4 in stock
SKU 472-Z-35
Brand
Add to wishlist Add to compare

Description

Introduction

Leadshine Technology Co., Ltd. is one of the largest technology companies involved in the production of high-quality motion control products in the world. The company's DM556 digital stepper motor driver Leadshine is a professional driver developed with DSP advanced control algorithm. The algorithm provides a unique way of smooth movement, ensures optimal torque and eliminates mid-range instability. It is suitable for two-phase and four-phase stepper motor Nema 23, Nema 24 and Nema 34 with less than 5.6 A phase current. The drive voltage is from 20VDC to 50VDC.

Key Features:

  • Anti-resonance provides optimal torque and eliminates mid-range instability
  • Auto-identification and auto-configuration of parameters enables optimal settings for different engines.
  • 15 microstep resolutions: 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
  • Soft start without stepper motors skipping when power is turned on
  • Input voltage 18-50 VDC (36 VDC recommended)
  • Maximum drive current 5.6 A
  • Automatic reduction of idle current
  • Suitable for 2-phase and 4-phase motor
  • Input pulse frequency up to 200 KHz, TTL compatible and optically isolated input
  • Supports PUL/DUR and CW/CCW modes of operation
  • Protection against overvoltage and overcurrent

More details can be found in the driver documentation:

Leadshine DM556 User Manual

Hardware Installation Manual for the DM Series.

Connection DM556 stepper motor driver and stepper motor

The connections are the same as the Leadshine DM542 driver. Additional information can be found here connection.

Note: You can use a 5 – 24 V controller signal, but make sure the appropriate resistor is used:

Amplitude of the signal External limiting resistor R
5V No resistance.
12V 1kΩ (≥1/4 W)
24V 2kΩ (≥1/2 W)

Specifications

Power supply

20-50 VDC

Maximum current

5.6 A

Microstep resolution

400-25600 pulse/rev

Input pulse frequency

0~200kHz

Working temperature

< 70 °C

Brand

Leadshine

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. * represents mandatory fields.