Description
Introduction
The 24CS30C-500 is a two-phase Nema 24 step motor that has a maximum torque of 3.0Nm and a step angle of 1.8°. Each phase draws 5.0A at 2.5V.
How to connect Nema 24 stepper motor 3.0Nm with driver?
The 24CS30C-500 stepper motor is driver compatible DM556, DM860.
As the diagram shows, the motor has four wires, black, green, red and blue. The wires are connected to two different coils. Red and blue are connected to one coil and black and green to another. To rotate the motor, the coils are energized in a logical sequence.
If you need help connecting, you can always contact us. We will be happy to help you.
Specifications:
Model | 24CS30C-500 |
Frame size | Nema 24 |
A step (°) |
1.8 |
Motor length (mm) |
86 |
Rated voltage (V) |
2.5 |
Nominal current (A / phase) |
5.0 |
Phase resistance (Ω) |
0.5 |
Phase inductance (mH) |
2.2 |
Holding torque (nm) |
3.0 |
“Detent” torque (N. cm Max) |
16 |
Rotor inertia (g.cm²) |
690 |
Shaft | Single D shaft |
Shaft diameter (mm) |
8.00 ± 0.012 |
Number of wires (No.) |
4
Black A+, Green A-, Red B+, Blue B- |
Motor weight (d) |
1400 |
Reviews
There are no reviews yet.