Nema 17 bipolar stepper motor 1.7A 40Ncm with threaded rod

Key Features:
  • Brand: ACT Motor
  • Step angle: 1.8 °
  • Rated current/phase: 1.7 A
  • Rated voltage: 2.55 V
  • Phase inductance: 2.8 mH
  • Phase resistance: 1.5 Ω
  • Holding torque: 40 Ncm
  • Shaft diameter: Tr8*8 (P2), shaft length = 300 ± 2 mm
  • Motor length: 40 mm

34,00

Out of stock
SKU 472-Z-1-38
Brand

Description

Introduction

The 17HSL4417-300 is a hybrid two-phase Nema 17 bipolar stepper motor (stepper motor) 1.7A 40Ncm with a threaded rod, which has a step angle of 1.8 ° (200 steps / revolution). Each phase draws 1.7 A at 2.55 V. The maximum holding torque is 40 Ncm. The length of the threaded rod is 30 cm.

How to connect 17HSL4417-300 Nema 17 bipolar stepper motor with driver?

Wire colors of individual coils:

Nema 23 hybrid bipolar stepper motor

The 17HSL4417-300 stepper motor is also compatible with the following drivers:

Specifications

Serial model 17HSL4417-300
A step 1.8 ± 5% ° / step
Rated voltage 2.55V
Nominal current 1.70 A / phase
Phase resistance 1.50 ± 10% ohm / phase
Phase inductance 2.80 ± 20% mH / phase
Holding torque 40 Ncm
“Detent” torque 2.20 Ncm max
Rotor inertia 54 g/cm²
Number of wires 4

Black: A+, Green: A-, Red: B+, Blue: B-

Shaft diameter Tr8*8 (P2), shaft length = 300 ± 2 mm
Motor length 40 mm
Motor weight 0.39 kg

 

Specifications

Brand

Step angle

1.8 °

Rated current/phase

1.7 A

Rated voltage

2.55 V

Phase inductance

2.8 mH

Phase resistance

1.5 Ω

Holding torque

40 Ncm

Detent torque

2.2 Ncm

Shaft diameter

Tr8*8 (P2), shaft length = 300 ± 2 mm

Motor length

40 mm

Brand

ACT Motor

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. * represents mandatory fields.