Description
Introduction
17HS5425 is a two-phase Nema 17 step motor 48Ncm 2.5A, which has a step angle of 1.8° (200 steps / revolution). Each phase draws 2.5 A at 3.1 V, which enables a holding torque of 48 Ncm. The motor has four color-coded wires: black and green represent one coil; red and blue represent the other. 17HS5425 the stepper motor can be controlled by a pair of matching H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.
How to connect 17HS5425 Nema 17 stepper motor with driver?
As shown in the wiring diagram, there are four wires of different colors viz. red, green, black and blue. These wires are connected to two different coils. Red and blue are connected to one coil and black and green to another. To rotate the motor, the coils are energized in a logical sequence.
17HS5425 The Nema17 stepper motor is also compatible with the following drivers:
You are always welcome to contact us if you need help. We will be happy to help you.
Specifications
| Serial model | 17HS5425 |
| A step | 1.8 ± 5% ° / step |
| Rated voltage | 3.1V |
| Nominal current | 2.5 A / phase |
| Phase resistance | 1.25 ± 10% ohm / phase |
| Phase inductance | 1.80 ± 20% mH / phase |
| Holding torque | 48 Ncm |
| “Detent” torque | 2.80 Ncm max |
| Rotor inertia | 68 g-cm² |
| Number of wires | 4
Black: A+, Green: A-, Red: B+, Blue: B- |
| Shaft diameter | 5.00 ± 0.012 mm, single round shaft |
| Motor length | 48 mm |
| Motor weight | 0.28 kg |
Possibilities of use
NEMA 17 is a stepper motor used in 3D printers and smaller CNC routers. Also, these smaller motors find applications in many robotic and animatronic applications.
