Cloudray Nema 17 stepper motor 71Ncm 1.8A + connector, D shaft

Key Features:
  • Brand: Cloudray
  • Step angle: 1.8 °
  • Rated current/phase: 1.8 A
  • Rated voltage: 3.49 V
  • Phase inductance: 4.96 mH
  • Phase resistance: 1.94 Ω
  • Holding torque: 71 Ncm
  • Shaft diameter: 5 mm
  • Motor length: 60 mm

21,60

8 in stock
SKU 472-Z-1-31
Brand
Add to wishlist Add to compare

Description

Introduction

17CS07A-180E is a two-phase Nema 17 step motor 71Ncm 1.8A, which has a step angle of 1.8° (200 steps/rev). For easier installation, a connector with 30 cm long wires is included. Each phase draws 1.8 A at 3.49 V. The motor has four color-coded wires for the two coils.

You can find the same stepper motor with fixed wires instead of a connector here.

How to connect Nema 17 stepper motor 71Ncm 1.8A with a driver?

As shown in the diagram below, there are four different colored wires viz. red, green, black and blue representing the two coils.

Speed-torque curve

Specifications

17CS07A-180E Specification

Serial model 17CS07A-180E
A step 1.8 ± 5% ° / step
Rated voltage 3.49V
Nominal current 1.80 A / phase
Phase resistance 1.94 ± 10% ohm / phase
Phase inductance 4.96 ± 20% mH / phase
Holding torque 71 Ncm
Rotor inertia 114 g-cm²
Number of wires 4

 

Red: A+, Blue: A-, Green: B+, Black: B-

Shaft diameter 5.00 ± 0.012 mm, single D shaft
Motor length 60 mm
Motor weight 0.5 kg

 

Specifications

Step angle

1.8 °

Rated current/phase

1.8 A

Rated voltage

3.49 V

Phase inductance

4.96 mH

Phase resistance

1.94 Ω

Holding torque

71 Ncm

Shaft diameter

5 mm

Motor length

60 mm

Brand

Cloudray

Reviews

There are no reviews yet.

Write A Review

Your email address will not be published. * represents mandatory fields.