Description
Introduction
The 34HS9456 is a hybrid Nema 34 bipolar stepper motor 7.5Nm that has a step angle of 1.8° (200 steps/rev). Each phase draws 5.6A at 2.13V, giving a holding torque of 7.5Nm. The motor has four color-coded wires: red and green represent one coil; yellow and blue represent the other. We use a bipolar stepper motor driver to control the 34HS9456 stepper motor.
How to wire 34HS9456 Nema 34 bipolar stepper motor 7.5 Nm with driver?
As shown in the wiring diagram, there are four wires of different colors viz. red, green, yellow and blue. These wires are connected to two different coils. Red and green are connected to one coil and yellow and blue to the other. To rotate the motor, the coils are energized in a logical sequence.
- For more information on how to connect this stepper motor to the DM860, click this link.
If you need help connecting, you can always contact us. We will be happy to help you.
Other related components
34HS9456 stepper motor Nema 34 is compatible with DM860 drivers and 68V 300W unregulated power supply or 60V 350W switching power supply.
Also available jaw couplings, L bracket, gearbox for Nema 34 stepper motor.
Specifications:
| Model | 34HS9456 |
| Frame size | Nema 34 |
| A step (°) |
1.8 |
| Motor length (mm) |
98 |
| Rated voltage (V) |
2.13 |
| Nominal current (A / phase) |
5.6 |
| Phase resistance (Ω) |
0.38 |
| Phase inductance (mH) |
4.1 |
| Holding torque (Nm Min) |
7.5 |
| “Detent” torque (Ncm maximum) |
9.5 |
| Rotor inertia (g.cm²) |
1700 |
| Shaft | Single double flat shaft |
| Shaft diameter (mm) |
14 |
| Front shaft length (mm) |
37 |
| Number of wires (No.) |
4
Red A+, Green A-, Yellow B+, Blue B- |
| Motor weight (d) |
3000 |
Nema 34 bipolar stepper motor 7.5Nm and possibility of use
NEMA 34 is a stepper motor that usually has several times the holding torque of Nema 23, so it is used in machines that require high torque.
Reviews
There are no reviews yet.