Description
Inductive proximity sensor PL-05P PNP 10-30VDC and its features
OMCH's PL-05P PNP 10-30VDC Inductive Proximity Sensor can detect metal objects approaching the sensor without physical contact with the target.
This sensor is of the "normal open" (NO) type, which means that the output is switched on only when the target enters the detection area. The output is in the normal state "off". The sensor has 3 wires (the meaning of the colors is described in the diagram and table below), their length is 2 m.
Specifications
| Model | PL-05P PNP |
| Switching distance | 5 mm ± 10 % |
| Switching output type | PNP |
| Detected material | Magnetic metal (detection distance is reduced for non-magnetic metal) |
| Switching frequency | 0.5 kHz |
| Supply voltage | 10-30VDC (6-36VDC), pulse 10 % lower |
| Consumption flow | < 13mA |
| Max. output current at the protected output | 200mA |
| Protection | Reverse connection protection, output short circuit protection |
| Ambient temperature | -30°C ~ 65°C |
| Ambient humidity | 35 ~ 95 % relative humidity |
| Insulation impedance | > 50 MΩ between power supply and chassis |
| Material | Housing: ABS |
| Type of protection | IP67 |
| Description of wires | blue: 0 VDC
brown: 10-30 VDC black: output |
Reviews
There are no reviews yet.