Ethernet SmoothStepper Mach3/4 6-osni CNC krmilnik

Ključne funkcije:
  • Znamka: Warp9 Tech Design Inc.
  • Napajanje: +5 VDC
  • Dimenzija: 92mm x 70mm
  • Število osi: 6

319,00

1 na zalogi
SKU 690-C-8-94
Znamka
Dodaj na seznam želja Dodaj za primerjavo

Opis

Opomba: v kolikor izdelek ni na zalogi nam pišite glede dobave. Dobavni roki so nekaj dni. 

Ethernet SmoothStepper Mach3/4 6-osni CNC krmilnik in njegove lastnosti

Ethernet SmoothStepper je krmilnik za nadzor gibanja, proizveden v ZDA. Sprejema ukaze iz programov kot sta Mach3, Mach4, in proizvaja zelo kakovostne nize pulzov za nadzor hitrosti in smeri vrtenja koračnih/servo motorjev. Omogoča nadzor največ 6 osi.

  • Uporablja Ethernet
  • Generira pulze s frekvenco do 4 Mhz.
  • Kompatibilen z Mach3 in Mach4 (priporočljivo)
  • Ima 51 I/O

Za delovanje Ethernet SmoothStepper dodatno (ni vključeno v tej ponudbi) potrebujemo Ethernet kabel, 5VDC napajalnik in 26-pinski ploščati kabel.

Specifikacije in navodila za uporabo


CNC Motion Controller
ESS

(Ethernet SmoothStepper)

Recommended for new builds

PC Interface Ethernet
Documentation ESS Manual
Mach4 Plugin Yes
Mach3 Plugin Yes
I/O ·         Parallel Port #1: 12 Outputs, 5 Inputs

·         Parallel Port #2: 4 Dedicated Outputs, 5 Dedicated Inputs, and 8 block assignable as input or output

·         Parallel Port #3: 4 Dedicated Outputs, 5 Dedicated Inputs, and 8 block assignable as input or output

Current Drive Output All pins are rated for 0V to 5V.

The following output pins have a drive (sink) of +(-) 32mA:

·         Port 2 pins 2 through 9

·         Port 3 pins 2 through 9

The following output pins have a drive (sink) of +(-) 24mA:

·         Port 1 pins 1, 2, 3, 4, 5, 6, 7, 8, 9, 14, 16, 17

·         Port 2 pins 1, 14, 16, 17

·         Port 3 pins 1, 14, 16, 17

Click here for more details.

Pulse Output Capabilities Up to 4 MHz, Step and Direction, Quadrature, CW/CCW
Motor Control Capability * Up to 6 Motors (Step and Direction, Quadrature, or CW/CCW)

Plus a Spindle (Relay, PWM, Step and Direction, Quadrature, or CW/CCW).

Encoders/MPG > 4 MHz capture rate

Mach3: Up to 5 total

Mach4: 7 Encoders, 3 MPGs

Configurable Noise Filtering per Class of Input Mach3 Input Classes: Limits, home, probe, E-Stop, Jog, Encoders/MPGs

Mach4: Each input individually configurable

Features ·         Threading for lathes (single pulse per rev for RPM, or encoder A for RPM.  Index pulse required for synchronization)

·         Laser Vector (lines) and Laser Raster (bmp image) support with Mach4

·         M62/M63 support for lasers/water jets/plasma applications in Mach4

·         M10/M11 support for lasers/ water jets in Mach3

·         Backlash Compensation

·         THC for Plasma Cutting

·         Runs with Mach3 and Mach4

·         Auto Squaring of a 2 motor (master/Slave) axis if two home switches are used (Mach4 and Mach3).

Power Source External 5V Power Supply Required
PC Configuration Utility The System Configuration Utility is provided to configure your PC for use with the ESS in as few as 3 mouse clicks.
Windows Drivers No Drivers for the ESS.

(Your computer should already have drivers installed for your Ethernet Card.)

V kolikor imate dodatna vprašanja, ste vedno dobrodošli, da nas kontaktirate. Z veseljem vam bomo pomagali.

Specifikacije

Znamka

Napajanje

+5 VDC

Dimenzija

92mm x 70mm

Število osi

6

Znamka

Warp9 Tech Design Inc.

Mnenja

Zaenkrat še ni mnenj.

Napiši povzetek

Vaš e-naslov ne bo objavljen. * označuje zahtevana polja