Description
Inductive proximity sensor PL-05P3 PNP 10-30VDC NC/NO and its properties
OMCH's PL-05P3 PNP 10-30VDC NC/NO Inductive Proximity Sensor can detect metal objects approaching the sensor without physical contact with the target.
The sensor can be used in NO (normal open) or NC (normal close) configuration. The sensor has 4 wires (the meaning of the colors is described in the table below), their length is 2 m.
Specifications
| Model | PL-05P3 PNP |
| Switching distance | 5 mm ± 10 % |
| Switching output type | PNP |
| Detected material | Magnetic metal (detection distance is reduced for non-magnetic metal) |
| Switching frequency | 0.5 kHz |
| Supply voltage | 10-30VDC (6-36VDC), pulse 10 % lower |
| Consumption flow | < 13mA |
| Max. output current at the protected output | 200mA |
| Protection | Reverse connection protection, output short circuit protection |
| Ambient temperature | -30°C ~ 65°C |
| Ambient humidity | 35 ~ 95 % relative humidity |
| Insulation impedance | > 50 MΩ between power supply and chassis |
| Material | Housing: ABS |
| Type of protection | IP67 |
| Description of wires | blue: 0 VDC brown: 10-30 VDC black: output NO white: NC output |
Reviews
There are no reviews yet.