Description
Description
The Arduino NANO ATmega328 CH340G is a small microcontroller board based on the ATmega328. We also offer Uno R3 with ATmega328P. It has 14 digital input/output pins (6 of which can be used as PWM outputs), 8 analog inputs, a 16 MHz ceramic resonator, a miniUSB connector, a power socket, ICSP and a reset button. It uses a CH340G chip for USB-Serial conversion. Simply power the microcontroller with a DC power supply or battery, or connect it to a computer with a miniUSB cable.
How to use Arduino NANO ATmega328 CH340G?
Page Getting Started with Arduino NANO contains much of the information you need to configure the Arduino NANO board, use the Arduino software (IDE), and get started with coding and electronics.
Useful information for connection can also be found here connection.
If you need additional help with your project, contact us contact.
Specifications
| MICROCONTROLLER | ATMEGA328 |
| WORKING VOLTAGE | 5V |
| INPUT VOLTAGE (RECOMMENDED) | 7-12V |
| INPUT VOLTAGE (LIMIT) | 6-20V |
| DIGITAL I/O PINS | 14 |
| PWM DIGITAL I/O PINS | 6 |
| ANALOG INPUT PINS | 8 |
| DC CURRENT ON I/O PIN | 20mA |
| MAX DC CURRENT FOR 3.3V PIN | 50mA |
| FLASH MEMORY | 32 KB (ATmega328) of which 2 KB is used for the bootloader |
| SHAME | 2 KB (ATmega328) |
| EEPROM | 1 KB (ATmega328) |
| CLOCK FREQUENCY | 16 MHz |
| LED_BUILTIN | 13 |
| LENGTH | 45 mm |
| WIDTH | 18 mm |
| WEIGHT | 7 Mr |
Reviews
There are no reviews yet.