Description
Introduction
34HS1456D14L34J5-2000 Nema 34 is a two-phase stepper motor that has a step angle of 1.8° (200 steps / revolution). Each phase draws 5.6A at 3.36V, allowing a holding torque of 10Nm. The motor has four color-coded wires: red and white represent one coil; yellow and blue represent the other. We use a bipolar stepper motor driver to control the 34HS1456D14L34J5-2000 stepper motor.
Other related components
34HS1456D14L34J5-2000 Nema 34 stepper motor is compatible with 68V 300W unregulated power supply or 60V 350W switching power supply and DM860 drivers . We can also use DM2522 driver that connects to mains power, so we don't need an additional power supply.
Check it out too L bracket for fixing the Nema 34 stepper motor to the base and jaw couplings to connect the motor axis with the rest of the system.
If we need an even higher torque, we can use it gearbox for Nema 34 stepper motor.
Specifications:
34HS1456D14L34J5-2000 Datasheet
Series Model |
34HS1456D14L34J5-2000 |
Frame size | Nema34 |
A step (°) |
1.8 |
Motor length (mm) |
114 |
Rated voltage (V) |
3.36 |
Nominal current (A / phase) |
5.6 |
Phase resistance (Ω) |
0.6 |
Phase inductance (mH) |
7.5 |
Holding torque (Nm Min) |
10 |
“Detent” torque (N. cm Max) |
12.5 |
Rotor inertia (g.cm²) |
2700 |
Shaft | Single shaft with removable keyway |
Shaft diameter (mm) |
14 |
Shaft length (mm) |
34 |
Number of wires | 4
Red: A+, White: A-, Yellow: B+, Blue: B- |
Motor weight (d) |
4200 |
Reviews
There are no reviews yet.